Threat intelligence, made actionable Browse the latest NVD vulnerability records, narrow them by technology and severity, and subscribe to the categories that matter.
Nuxt from 4.6.0 before 4.6.2 contains a route parameter confusion vulnerability in getRouterParam and getRouterParams that lets attackers return a parameter value different from the one h3 matched by sending paths containing an encoded question mark (%3F). Attackers can craft requests where authorization checks use the Nuxt helper value while resource selection uses event.context.params, allowing access to unauthorized resour…
A vulnerability was found in WAVLINK WN536AX6-A V260507. This affects the function strcpy of the file /protocol.csp of the component OpenVPN Handler. The manipulation of the argument openvpn_ip results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure.
A flaw has been found in WAVLINK WN536AX6-A V260507. The affected element is an unknown function of the file /protocol.csp of the component openvpn_cli Handler. Executing a manipulation of the argument file_id can lead to os command injection. The attack can be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure.
A vulnerability was detected in WAVLINK WN536AX6-A V260507_2.0.0. Impacted is the function sub_416d48/sub_41a7c0 of the file /bin/ioos of the component VPN Client List Handler. Performing a manipulation of the argument opt results in missing authentication. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure.
A vulnerability has been found in WAVLINK WN553X1-B 260403_2.0.0. This affects the function sub_4162A8 of the file /bin/ioos of the component ovpn_file Handler. Such manipulation of the argument file_id leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure.
A vulnerability was determined in WAVLINK WN553X1-B V260403_2.0.0. The affected element is the function sub_416568 of the file /bin/ioos of the component OpenVPN CLI Handler. This manipulation of the argument file_id causes os command injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure.
An authentication bypass using an alternate path or channel vulnerability in Fortinet FortiSandbox 5.0.0 through 5.0.6, FortiSandbox 4.4.0 through 4.4.9, FortiSandbox 4.2 all versions, FortiSandbox PaaS 5.0.0 through 5.0.6, FortiSandbox PaaS 4.4 all versions, FortiSandbox PaaS 4.2 all versions may allow attacker to execute unauthorized code or commands via crafted HTTP requests
Frappe Builder versions 1.33.0 before1.36.0 contain a missing authorization vulnerability in the improve_prompt endpoint that allows any authenticated non-Guest session to invoke LLM completions without proper permission checks. Attackers can call the improve_prompt API to leverage the site owner's stored OpenRouter API key via resolve_api_key, consuming paid LLM credits and effectively turning the site into a free LLM proxy.
Multiple cross site scripting (XSS) vulnerabilities affect OPNsense firewall vesrion 26.7.1_1 and earlier allows low privileged attacker to execute Javascript in the context of another user visiting a specific page or clicking on a specifically crafted link.
The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transaction random value. It was seeded once with sys_rand32_get() in dhcpv4_start_internal(), incremented by one in dhcpv4_send_discover() and dhcpv4_send_decline(), and never changed by dhcpv4_send_request() — so every RENEWING and REBINDING exchange reused, unchanged, the id…
The WireGuard VPN service in subsys/net/lib/wireguard/wg.c updated the peer endpoint from a message it could not authenticate. In handle_transport_data(), when the 32-bit receiver index of an incoming transport-data message matched no session, the code both scheduled a new handshake and copied the datagram's source address into peer->endpoint with memcpy(&peer->endpoint, peer_addr, sizeof(peer->endpoint)). Because the receive…
Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a…
ConnMan through 2.0 has a stack-based buffer overflow via a DHCPv6 Reply message. This occurs in get_domains in gdhcp/client.c. It copies a fixed NS_MAXDNAME (1025) bytes from a DHCPv6 DOMAIN_LIST (option 24) value into a 1026-byte stack buffer dns_name regardless of the actual option length, then walks DNS labels with an unbounded "c += jump + 1" loop. A crafted DHCPv6 REPLY with a DOMAIN_LIST option of >= 1025 non-zero byte…
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. In versions 25.12 and prior, odhcpd's DHCPv6 self-loop detection at dhcpv6.c:720 uses a network-byte-order DUID length value directly as the memcmp() size parameter. On little-endian hosts, this causes memcmp() to read far beyond the stack buffer — a single unauthenticated DHCPv6 packet triggers a 2560-byte overread from a 128-byte buffer. At time …
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. Prior to version 25.12, odhcpd's DHCPv6 IA response handler writes past the end of a fixed 512-byte stack buffer (pdbuf) when a single DHCPv6 REQUEST carries enough IA options to nearly exhaust the reply space. Two independent overflow sites exist in the same call chain, both reachable from the network via a single unauthenticated UDP packet. odhcp…
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. From version 17.01.0 to before version 25.12.3, odhcpd's DHCPv6 IA parser accepts an IA_NA or IA_PD option whose body is shorter than struct dhcpv6_ia_hdr, casts the option header to that full structure, and reads ia->iaid before proving that the IA body contains the IAID field. If an unauthenticated network-adjacent client places a zero-length or …
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. Prior to version 25.12, odhcpd's DHCPv6 IA handler keeps a per-message `first` lease pointer so multiple IA options in one message reuse the same Reconfigure authentication key. A DHCPv6 REQUEST from an adjacent-network client can make the first IA set `first`, then make a later same-IAID IA fail the on-link check and free that same lease, leaving …
In the Linux kernel, the following vulnerability has been resolved: cipso: adjust cached option offsets when removing CIPSO cipso_v4_skbuff_delattr() removes the CIPSO bytes but does not adjust cached offsets for options that follow them. For example, with a valid 10-byte CIPSO option followed by a seven-byte RR option, parsing records rr at offset 30. Removing CIPSO moves RR to offset 20, while the cached offset remains …
In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Keep the domain reference while processing hotplug We process hotplug events in a workqueue that may run after the domain has been removed by tb_domain_remove(). For example if user unloads the driver while at the same time plugging a device router we may have scheduled tb_handle_hotplug() to run. Avoid possible UAF in this case by taking the …
Improper Authentication in ASUS router modules allows an unauthenticated nearby user to send an HTTP request and forge an access ticket, subsequently enabling the user to perform administrator operations. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.
Improper Neutralization of Special Elements used in an OS Command (“OS Command Injection”) and Cross-Site Request Forgery (CSRF) in an ASUS router model allow an attacker to trick a logged-in administrator into visiting a phishing website, causing the router to execute arbitrary commands with root privileges. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.
Improper Neutralization of Special Elements used in an OS Command in certain ASUS routers allows remote user to execute arbitrary commands with root privileges via crafted parameters sent to the router while the device is in its factory-default state.Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.
Next.js is a React framework for building full-stack web applications. From 13.0.0 until 15.5.28 and 16.4.1, crafted requests targeting App Router applications with at least one Server Action can cause excessive CPU consumption and block processing of further requests in the same process. Applications using the Pages Router and App Router applications without Server Actions are not affected. This issue is fixed in versions 15…
A flaw in the cross-site request forgery (CSRF) prevention of KNIME Business Hub prior to version 1.19.0 allows an authenticated attacker to perform a CSRF attack with passive user interaction. This means the state of a resource could be changed without the user noticing. As a workaround, an API gateway for firewall in front of KNIME Business Hub could remove the X-Forwaded-For header from all incoming requests.
An issue in SKYWORTH DIGITAL CO., LTD SK-WR6640X Wi-Fi 6 Dual-Band Fiber Router (AX1800M) V1.0.3 allows a remote attacker to obtain sensitive information via the hidden_factory_switch.gch