Evidence-led vulnerability intelligence · 2026-10-26 20:46 IST

CVE-2026-99089

In the Linux kernel, the following vulnerability has been resolved: ASoC: samsung: i2s: enable op_clk in probe to balance runtime PM The probe function puts the device into the runtime PM active state with only the "iis" bus clock enabled, but it also sets priv->op_clk to the parent of the RCLK_SRC mux without enabling it. The runtime PM suspend callback disables both clocks, so the first runtime suspend after probe disables op_clk once more than it was enabled. On Exynos5250 Arndale both clocks resolve to the same EXYNOS_I2S_BUS gate, so this triggers the following warning during boot: WARNING: drivers/clk/clk.c:1270 at clk_core_disable+0xe4/0x23c, CPU#0: kworker/u8:3/45 i2s_bus already disabled ... Workqueue: pm pm_runtime_work Call trace: ... clk_core_disable from clk_disable+0x28/0x34 clk_disable from i2s_runtime_suspend+0x58/0x68 [snd_soc_i2s] i2s_runtime_suspend [snd_soc_i2s] from genpd_runtime_suspend+0xc4/0x298 genpd_runtime_suspend from __rpm_callback+0x48/0x18c __rpm_callback from rpm_callback+0x4c/0x50 rpm_callback from rpm_suspend+0xf4/0x718 rpm_suspend from pm_runtime_work+0x9c/0xa0 ... Fix this by enabling op_clk in probe right after getting it, so the clock state matches the runtime PM active state, and by disabling it in remove.

Executive briefing

A structured intelligence assessment has not yet been generated. The source description is shown above. The background enrichment worker will retry this record.

Assessment: Potential exposure only — validate product, version, configuration and vendor applicability.

Evidence confidence: Not assessed Evidence-derived, not an exploitability verdict

Severity & attack characteristics

N/A / 10 · CVSS

CVSS vector:
Not supplied

No CVSS vector is currently available in the source record.

Technical explanation & impact

Technical root-cause details are not available in the current source record.

Assess the impact using the published CVSS metrics and the affected vendor component.

Affected products and versions

NVD has not supplied machine-readable vulnerable CPE product/version entries for this CVE. This is an information gap, not proof that no products are affected. Check the vendor advisory references below.

Remediation & validation

  1. Identify exposure by comparing the affected product and version ranges with your asset inventory, SBOM and externally exposed services.
  2. Review the linked vendor security advisory or patch notes. Upgrade to a vendor-confirmed fixed release; do not infer a fixed version from the CVE description.
  3. Until patched, consider restricting network access or disabling the affected feature where operationally safe. These are temporary controls, not a substitute for a vendor fix.
  4. Validate the remediation with a version check and vulnerability rescan, then retain change evidence.

No fixed version is displayed unless it is explicitly established by a vendor advisory. Follow the vendor's release notes for exact product and branch applicability.

Vendor advisories, patches & exploit references

No external references are currently supplied in the CVE record.

Open NVD record ← Back to CVE Watch