CVE-2026-98262
In the Linux kernel, the following vulnerability has been resolved: ata: libahci: clear PxCLBU and PxFBU for AHCI_HFLAG_32BIT_ONLY A user reported that commit 105c42566a55 ("ata: ahci: force 32-bit DMA for JMicron JMB582/JMB585") made the JMicron JMB585 unusable on his board. The failure is seen as soon as the ahci driver is probed, and booting with iommu=off does not solve the problem. Looking at the AHCI specification, PxCLBU and PxFBU are both read only '0' for HBAs that do not support 64-bit addressing. For HBAs that do support 64-bit addressing, the registers are read write, with a reset value that is Implementation Specific. When using the AHCI_HFLAG_32BIT_ONLY flag, the HBA does support 64-bit addressing, and a 32-bit DMA mask is set by simply clearing HOST_CAP_64. Thus, in this case, we need to explicitly clear the registers to 0.
Executive briefing
A structured intelligence assessment has not yet been generated. The source description is shown above. The background enrichment worker will retry this record.
Evidence confidence: Not assessed Evidence-derived, not an exploitability verdict
Severity & attack characteristics
CVSS vector:Not supplied
No CVSS vector is currently available in the source record.
Technical explanation & impact
Technical root-cause details are not available in the current source record.
Assess the impact using the published CVSS metrics and the affected vendor component.
Affected products and versions
NVD has not supplied machine-readable vulnerable CPE product/version entries for this CVE. This is an information gap, not proof that no products are affected. Check the vendor advisory references below.
Remediation & validation
- Identify exposure by comparing the affected product and version ranges with your asset inventory, SBOM and externally exposed services.
- Review the linked vendor security advisory or patch notes. Upgrade to a vendor-confirmed fixed release; do not infer a fixed version from the CVE description.
- Until patched, consider restricting network access or disabling the affected feature where operationally safe. These are temporary controls, not a substitute for a vendor fix.
- Validate the remediation with a version check and vulnerability rescan, then retain change evidence.
No fixed version is displayed unless it is explicitly established by a vendor advisory. Follow the vendor's release notes for exact product and branch applicability.
Vendor advisories, patches & exploit references
No external references are currently supplied in the CVE record.