Evidence-led vulnerability intelligence · 2026-09-24 22:47 IST

CVE-2026-97515

In the Linux kernel, the following vulnerability has been resolved: i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845 On NPCM845, when a target on the I3C bus gets stuck holding SDA low, the controller reports a false Master Request (MR) in-band interrupt event. The driver handles this by emitting a STOP condition to restore the bus. However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that emitting a STOP condition may spuriously set the SLVSTART interrupt status bit. In the Master Request case, this creates a feedback loop: the STOP triggers a new SLVSTART event, the IRQ handler fires again, the controller still reports an MR type, another STOP is emitted, and the cycle repeats indefinitely, resulting in an IRQ storm that can lock up the CPU. Clear the SLVSTART status bit explicitly after emitting the STOP in the Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk is set. This breaks the feedback loop without affecting normal SLVSTART processing, which is already guarded in the top-level IRQ handler by checking that MSTATUS is in SLVREQ state.

UNRATED · N/ALinux

Executive briefing

A structured intelligence assessment has not yet been generated. The source description is shown above. The background enrichment worker will retry this record.

Assessment: Potential exposure only — validate product, version, configuration and vendor applicability.

Evidence confidence: Not assessed Evidence-derived, not an exploitability verdict

Severity & attack characteristics

N/A / 10 · CVSS

CVSS vector:
Not supplied

No CVSS vector is currently available in the source record.

Technical explanation & impact

Technical root-cause details are not available in the current source record.

Assess the impact using the published CVSS metrics and the affected vendor component.

Affected products and versions

NVD has not supplied machine-readable vulnerable CPE product/version entries for this CVE. This is an information gap, not proof that no products are affected. Check the vendor advisory references below.

Remediation & validation

  1. Identify exposure by comparing the affected product and version ranges with your asset inventory, SBOM and externally exposed services.
  2. Review the linked vendor security advisory or patch notes. Upgrade to a vendor-confirmed fixed release; do not infer a fixed version from the CVE description.
  3. Until patched, consider restricting network access or disabling the affected feature where operationally safe. These are temporary controls, not a substitute for a vendor fix.
  4. Validate the remediation with a version check and vulnerability rescan, then retain change evidence.

No fixed version is displayed unless it is explicitly established by a vendor advisory. Follow the vendor's release notes for exact product and branch applicability.

Vendor advisories, patches & exploit references

No external references are currently supplied in the CVE record.

Open NVD record ← Back to CVE Watch