CVE-2026-95826
The SMSC911x/LAN9220 Ethernet driver stages every outgoing frame in a fixed-size static buffer before pushing it to the controller FIFO. eth_tx() in drivers/ethernet/eth_smsc911x.c took the frame length from net_pkt_get_len(pkt) and passed it directly to net_pkt_read(pkt, tx_buf, total_len), with no comparison against the size of tx_buf (NET_ETH_MAX_FRAME_SIZE). net_pkt_read() takes no destination size and only fails when the packet is shorter than the requested length, so any packet longer than the staging buffer was copied past its end. Nothing between the IP layer and the driver bounds the frame to what the link can carry: ethernet_send() in subsys/net/l2/ethernet/ethernet.c performs no length check, and the IPv6 output path only compares the packet against the interface MTU when CONFIG_NET_IPV6_FRAGMENT is enabled (it is disabled by default). The size the stack will build is therefore governed by the interface MTU, and that MTU is remotely settable: handle_ra_input() in subsys/net/ip/ipv6_nbr.c honours the MTU option of any Router Advertisement with a value up to 0xffff, gated only by the standard hop-limit-255 and link-local-source checks. An unauthenticated attacker on the same link can raise the MTU and then have the device emit a single frame of several kilobytes, for example as a TCP segment from any service that returns more than ~1.5 KB or as an oversized UDP datagram. The result is an out-of-bounds write into .bss immediately after tx_buf, with the overrun length and much of its content derived from the transmitted frame. Consequences range from corruption of adjacent kernel data and a crash to potential control-flow influence where the clobbered globals hold pointers; the practical overrun size is bounded by the network buffer pool rather than by the advertised MTU. The fix rejects frames larger than NET_ETH_MAX_FRAME_SIZE with -EMSGSIZE before any TX_DATA_PORT write, so the controller FIFO is also not left holding a command word without its payload.
Executive briefing
A structured intelligence assessment has not yet been generated. The source description is shown above. The background enrichment worker will retry this record.
Evidence confidence: Not assessed Evidence-derived, not an exploitability verdict
Severity & attack characteristics
CVSS vector:CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H
Technical explanation & impact
Technical root-cause details are not available in the current source record.
Assess the impact using the published CVSS metrics and the affected vendor component.
Affected products and versions
NVD has not supplied machine-readable vulnerable CPE product/version entries for this CVE. This is an information gap, not proof that no products are affected. Check the vendor advisory references below.
Remediation & validation
- Identify exposure by comparing the affected product and version ranges with your asset inventory, SBOM and externally exposed services.
- Review the linked vendor security advisory or patch notes. Upgrade to a vendor-confirmed fixed release; do not infer a fixed version from the CVE description.
- Until patched, consider restricting network access or disabling the affected feature where operationally safe. These are temporary controls, not a substitute for a vendor fix.
- Validate the remediation with a version check and vulnerability rescan, then retain change evidence.
No fixed version is displayed unless it is explicitly established by a vendor advisory. Follow the vendor's release notes for exact product and branch applicability.
Vendor advisories, patches & exploit references
- https://github.com/zephyrproject-rtos/zephyr/commit/84de8990c30b13f713ec4913684d214ba85e33d0 VENDOR vulnerabilities@zephyrproject.org
- https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-r2gv-c3q9-4fmj VENDOR vulnerabilities@zephyrproject.org