CVE-2026-81038
The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp.c). Before this fix the four-byte Checksum Value field was appended whenever the requested op code was BT_GATT_OTS_OACP_PROC_CHECKSUM_CALC, regardless of the result code. The response payload is a bare, uninitialized four-byte stack buffer declared with NET_BUF_SIMPLE_DEFINE(resp_param, sizeof(uint32_t)) in bt_gatt_ots_oacp_write(), and it is filled only on the success path of oacp_checksum_proc_validate(). On every failure path the buffer is still empty, so net_buf_simple_pull_le32() was invoked on a zero-length buffer. The OACP characteristic and its client characteristic configuration descriptor are declared with BT_GATT_PERM_WRITE and BT_GATT_PERM_READ | BT_GATT_PERM_WRITE, so no pairing, encryption, or authentication is required. Any peer within radio range that can connect to a device running the OTS server can enable OACP indications and write a nine-byte Calculate Checksum command that fails validation — for example by issuing it with no object selected, which returns BT_GATT_OTS_OACP_RES_INV_OBJ. Because oacp_command_decode() accepts the Calculate Checksum op code unconditionally (it is not guarded by CONFIG_BT_OTS_OACP_CHECKSUM_SUPPORT), builds without checksum support are reachable too: they answer BT_GATT_OTS_OACP_RES_OPCODE_NOT_SUP and take the same bad path. On builds with CONFIG_ASSERT enabled, the zero-length pull trips the assertion inside net_buf_simple_pull_mem() and panics the device, giving a remotely triggered denial of service. On builds with assertions disabled there is no check: the pull returns the untouched stack array and four bytes of uninitialized stack memory are copied into the indication and transmitted to the peer, repeatable on every request. The disclosure is bounded to four bytes per request and the write stays inside the seven-byte res indication buffer, so there is no memory corruption; the impact is uninitialized-memory disclosure plus an availability loss in assertion-enabled configurations.
Executive briefing
The source record describes: The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp.c). Before this fix the four-byte Checksum Value field was appended whenever the requested op code was BT_GATT_OTS_OACP_PROC_CHECKSUM_CALC, regardless of the result code. The response payload is a bare, uninitialized four-byte stack buffer declared with NET_BUF_SIMPLE_DEFINE(resp_param, sizeof(uint32_t)) in bt_gatt_ots_oacp_write(), and it is filled only on the success path of oacp_checksum_proc_validate(). On every failure path the buffer is still empty, so net_buf_simple_pull_le32() was invoked on a zero-length buffer. The OACP characteristic and its client characteristic configuration descriptor are declared with BT_GATT_PERM_WRITE and BT_GATT_PERM_READ | BT_GATT_PERM_WRITE, so no pairing, encryption, or authentication is required. Any peer within radio range that can connect to a device running the OTS server can enable OACP indications and write a nine-byte Calculate Checksum command that fails validation — for example by issuing it with no object selected, which returns BT_GATT_OTS_OACP_RES_INV_OBJ. Because oacp_command_decode() accepts the Calculate Checksum op code unconditionally (it is not guarded by CONFIG_BT_OTS_OACP_CHECKSUM_SUPPORT), builds without checksum support are reachable too: they answer BT_GATT_OTS_OACP_RES_OPCODE_NOT_SUP and take the same bad path. On builds with CONFIG_ASSERT enabled, the zero-length pull trips the assertion inside net_buf_simple_pull_mem() and panics the device, giving a remotely triggered denial of service. On builds with assertions disabled there is no check: the pull returns the untouched stack array and four bytes of uninitialized stack memory are copied into the indication and transmitted to the peer, repeatable on every request. The disclosure is bounded to four bytes per request and the write stays inside the seven-byte res indication buffer, so there is no memory corruption; the impact is uninitialized-memory disclosure plus an availability loss in assertion-enabled configurations. The practical risk depends on whether an affected product/version is present, reachable and configured in an exploitable way. Review the affected-product evidence and linked vendor advisories before assigning exposure status.
Evidence confidence: Limited Evidence-derived, not an exploitability verdict
Severity & attack characteristics
CVSS vector:CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H
Technical explanation & impact
The technical mechanism is not expanded beyond the source description unless a referenced advisory supplies additional evidence. Read the linked vendor/CERT advisories for root-cause detail.
Potential impact must be interpreted from the published CVSS impact metrics and the affected component. A CVSS impact score is not proof that a particular asset is exploitable.
Weakness classification
CWE-617CWE-908Affected products and versions
NVD has not supplied machine-readable vulnerable CPE product/version entries for this CVE. This is an information gap, not proof that no products are affected. Check the vendor advisory references below.
Remediation & validation
- Identify exposure by comparing the affected product and version ranges with your asset inventory, SBOM and externally exposed services.
- Review the linked vendor security advisory or patch notes. Upgrade to a vendor-confirmed fixed release; do not infer a fixed version from the CVE description.
- Until patched, consider restricting network access or disabling the affected feature where operationally safe. These are temporary controls, not a substitute for a vendor fix.
- Validate the remediation with a version check and vulnerability rescan, then retain change evidence.
No fixed version is displayed unless it is explicitly established by a vendor advisory. Follow the vendor's release notes for exact product and branch applicability.
Vendor advisories, patches & exploit references
- https://github.com/zephyrproject-rtos/zephyr/commit/36145a6f1164e2e0a18c8c83d5b1be6e7d3f6e23 VENDOR vulnerabilities@zephyrproject.org
- https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-7c9w-mhqw-5g86 VENDOR vulnerabilities@zephyrproject.org
Information gaps & confidence notes
These gaps indicate missing source data. CVE Watch does not fill them with guessed product, exploit or patch details.
- NVD does not currently provide machine-readable vulnerable CPE product/version entries for this record.
Last enrichment: 2026-11-05T06:02:23+00:00 · Source last modified: 2026-11-04T05:19:03.580