Evidence-led vulnerability intelligence · 2026-09-04 23:47 IST

CVE-2026-80901

In the Linux kernel, the following vulnerability has been resolved: ipvs: fix the checksum validations ip_vs_in_icmp_v6() is missing checksum validation for ICMPv6 packets from clients. In fact, as for TCP/UDP we should validate the checksum for ICMP packets only when we mangle the packets on MASQ or on reply for tunnel. Also, Sashiko points out that handle_response_icmp() being common for IPv4 and IPv6 is missing the pseudo-header calculation while validating ICMPv6 messages from real servers which is a problem if checksum is not validated by the hardware. Fix the problems by creating ip_vs_checksum_common_check() helper and use it for TCP/UDP/ICMP both for IPv4 and IPv6. Rely on the nf_checksum() for validating the ICMP messages but use it also for TCP and UDP. Use correct IP offset for IP_VS_DBG_RL_PKT for TCP/UDP/SCTP. IPVS packets (TCP/UDP/SCTP/ICMP) do not need checksum validation on LOCAL_OUT (local clients or local real servers) and on FORWARD (traffic from servers on LAN). Do it only on LOCAL_IN, in case nf_checksum() is not called on PRE_ROUTING. Also, ip_vs_checksum_complete() can be marked static.

UNRATED · N/ALinux

Executive briefing

The source record describes: In the Linux kernel, the following vulnerability has been resolved: ipvs: fix the checksum validations ip_vs_in_icmp_v6() is missing checksum validation for ICMPv6 packets from clients. In fact, as for TCP/UDP we should validate the checksum for ICMP packets only when we mangle the packets on MASQ or on reply for tunnel. Also, Sashiko points out that handle_response_icmp() being common for IPv4 and IPv6 is missing the pseudo-header calculation while validating ICMPv6 messages from real servers which is a problem if checksum is not validated by the hardware. Fix the problems by creating ip_vs_checksum_common_check() helper and use it for TCP/UDP/ICMP both for IPv4 and IPv6. Rely on the nf_checksum() for validating the ICMP messages but use it also for TCP and UDP. Use correct IP offset for IP_VS_DBG_RL_PKT for TCP/UDP/SCTP. IPVS packets (TCP/UDP/SCTP/ICMP) do not need checksum validation on LOCAL_OUT (local clients or local real servers) and on FORWARD (traffic from servers on LAN). Do it only on LOCAL_IN, in case nf_checksum() is not called on PRE_ROUTING. Also, ip_vs_checksum_complete() can be marked static. The practical risk depends on whether an affected product/version is present, reachable and configured in an exploitable way. Review the affected-product evidence and linked vendor advisories before assigning exposure status.

Assessment: Potential exposure only — validate the installed product, exact version, configuration and vendor applicability before treating an asset as confirmed vulnerable.

Evidence confidence: Low Evidence-derived, not an exploitability verdict

Severity & attack characteristics

N/A / 10 ·

CVSS vector:

No CVSS vector is currently available in the source record.

Technical explanation & impact

The technical mechanism is not expanded beyond the source description unless a referenced advisory supplies additional evidence. Read the linked vendor/CERT advisories for root-cause detail.

Potential impact must be interpreted from the published CVSS impact metrics and the affected component. A CVSS impact score is not proof that a particular asset is exploitable.

Affected products and versions

NVD has not supplied machine-readable vulnerable CPE product/version entries for this CVE. This is an information gap, not proof that no products are affected. Check the vendor advisory references below.

Remediation & validation

  1. Identify exposure by comparing the affected product and version ranges with your asset inventory, SBOM and externally exposed services.
  2. Review the linked vendor security advisory or patch notes. Upgrade to a vendor-confirmed fixed release; do not infer a fixed version from the CVE description.
  3. Until patched, consider restricting network access or disabling the affected feature where operationally safe. These are temporary controls, not a substitute for a vendor fix.
  4. Validate the remediation with a version check and vulnerability rescan, then retain change evidence.

No fixed version is displayed unless it is explicitly established by a vendor advisory. Follow the vendor's release notes for exact product and branch applicability.

Vendor advisories, patches & exploit references

Information gaps & confidence notes

These gaps indicate missing source data. CVE Watch does not fill them with guessed product, exploit or patch details.

Last enrichment: 2026-11-07T17:03:28+00:00 · Source last modified: 2026-11-06T17:20:01.403

Open NVD record ← Back to CVE Watch