CVE-2026-80641
In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: enable the right set of ciphers The firmware version number check for IGTK introduced in commit c34dbc5900b0 ("wifi: wlcore: Add support for IGTK key") lets the amount of ciphers decrease on every boot of a too old firmware and that is practically happening. It also does not take into account other chips than the wl18xx. On some wl128x, the following can be observed when connecting via nm to a common ap: [ 484.113311] wlcore: WARNING could not set keys [ 484.117828] wlcore: ERROR Could not add or replace key [ 484.123016] wlan0: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-5) [ 484.123046] wlcore: Hardware recovery in progress. FW ver: Rev 7.3.10.0.142 [ 484.139923] wlcore: pc: 0x0, hint_sts: 0x00000048 count: 1 [ 484.145721] wlcore: down [ 484.148986] ieee80211 phy0: Hardware restart was requested [ 484.610473] wlcore: firmware booted (Rev 7.3.10.0.142) [ 484.633758] wlcore: Association completed. [ 484.690490] wlcore: ERROR command execute failure 14 [ 484.690490] ------------[ cut here ]------------ [ 484.700195] WARNING: drivers/net/wireless/ti/wlcore/main.c:872 at wl12xx_queue_recovery_work+0x64/0x74 [wlcore], CPU#0: kworker/0:0/892 This repeats endlessly. Always disable IGTK on wl12xx and fix the decrementing mess.
Executive briefing
A structured intelligence assessment has not yet been generated. The source description is shown above. The background enrichment worker will retry this record.
Evidence confidence: Not assessed Evidence-derived, not an exploitability verdict
Severity & attack characteristics
CVSS vector:Not supplied
No CVSS vector is currently available in the source record.
Technical explanation & impact
Technical root-cause details are not available in the current source record.
Assess the impact using the published CVSS metrics and the affected vendor component.
Affected products and versions
NVD has not supplied machine-readable vulnerable CPE product/version entries for this CVE. This is an information gap, not proof that no products are affected. Check the vendor advisory references below.
Remediation & validation
- Identify exposure by comparing the affected product and version ranges with your asset inventory, SBOM and externally exposed services.
- Review the linked vendor security advisory or patch notes. Upgrade to a vendor-confirmed fixed release; do not infer a fixed version from the CVE description.
- Until patched, consider restricting network access or disabling the affected feature where operationally safe. These are temporary controls, not a substitute for a vendor fix.
- Validate the remediation with a version check and vulnerability rescan, then retain change evidence.
No fixed version is displayed unless it is explicitly established by a vendor advisory. Follow the vendor's release notes for exact product and branch applicability.
Vendor advisories, patches & exploit references
No external references are currently supplied in the CVE record.