CVE-2026-64501
In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad_sigma_delta: fix CS held asserted and state leaks In ad_sigma_delta_single_conversion(), set_mode(AD_SD_MODE_IDLE) and disable_one() were called from the out: block while keep_cs_asserted was still true. This caused any SPI transfer issued by those callbacks to carry cs_change=1, leaving CS permanently asserted after the conversion. Fix by moving both calls into the out_unlock: block, after keep_cs_asserted is cleared, matching the pattern already used in ad_sd_calibrate(). In the error path of ad_sd_buffer_postenable(), if an operation fails after set_mode(AD_SD_MODE_CONTINUOUS) has already succeeded (e.g. spi_offload_trigger_enable()), the device is left in continuous conversion mode with CS physically asserted. Additionally, bus_locked remaining true after spi_bus_unlock() causes subsequent SPI operations to call spi_sync_locked() without the bus lock actually held, allowing concurrent SPI access. Fix the error path by clearing keep_cs_asserted first, then calling set_mode(AD_SD_MODE_IDLE) to revert the device mode and deassert CS, then clearing bus_locked before releasing the bus. For devices that implement neither set_mode nor disable_one (such as MAX11205, which has no physical CS pin), no SPI transfer is issued during cleanup and the cs_change flag has no effect on any physical line.
Executive briefing
The source record describes: In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad_sigma_delta: fix CS held asserted and state leaks In ad_sigma_delta_single_conversion(), set_mode(AD_SD_MODE_IDLE) and disable_one() were called from the out: block while keep_cs_asserted was still true. This caused any SPI transfer issued by those callbacks to carry cs_change=1, leaving CS permanently asserted after the conversion. Fix by moving both calls into the out_unlock: block, after keep_cs_asserted is cleared, matching the pattern already used in ad_sd_calibrate(). In the error path of ad_sd_buffer_postenable(), if an operation fails after set_mode(AD_SD_MODE_CONTINUOUS) has already succeeded (e.g. spi_offload_trigger_enable()), the device is left in continuous conversion mode with CS physically asserted. Additionally, bus_locked remaining true after spi_bus_unlock() causes subsequent SPI operations to call spi_sync_locked() without the bus lock actually held, allowing concurrent SPI access. Fix the error path by clearing keep_cs_asserted first, then calling set_mode(AD_SD_MODE_IDLE) to revert the device mode and deassert CS, then clearing bus_locked before releasing the bus. For devices that implement neither set_mode nor disable_one (such as MAX11205, which has no physical CS pin), no SPI transfer is issued during cleanup and the cs_change flag has no effect on any physical line. The practical risk depends on whether an affected product/version is present, reachable and configured in an exploitable way. Review the affected-product evidence and linked vendor advisories before assigning exposure status.
Evidence confidence: Low Evidence-derived, not an exploitability verdict
Severity & attack characteristics
CVSS vector:CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H
Technical explanation & impact
The technical mechanism is not expanded beyond the source description unless a referenced advisory supplies additional evidence. Read the linked vendor/CERT advisories for root-cause detail.
Potential impact must be interpreted from the published CVSS impact metrics and the affected component. A CVSS impact score is not proof that a particular asset is exploitable.
Affected products and versions
NVD has not supplied machine-readable vulnerable CPE product/version entries for this CVE. This is an information gap, not proof that no products are affected. Check the vendor advisory references below.
Remediation & validation
- Identify exposure by comparing the affected product and version ranges with your asset inventory, SBOM and externally exposed services.
- Review the linked vendor security advisory or patch notes. Upgrade to a vendor-confirmed fixed release; do not infer a fixed version from the CVE description.
- Until patched, consider restricting network access or disabling the affected feature where operationally safe. These are temporary controls, not a substitute for a vendor fix.
- Validate the remediation with a version check and vulnerability rescan, then retain change evidence.
No fixed version is displayed unless it is explicitly established by a vendor advisory. Follow the vendor's release notes for exact product and branch applicability.
Vendor advisories, patches & exploit references
- https://git.kernel.org/stable/c/c313bb7c38855e94ceef939d152dd75e5a904b5f REFERENCE 416baaa9-dc9f-4396-8d5f-8c081fb06d67
- https://git.kernel.org/stable/c/c72da0688575e5ef39c36bb44fed53aa18f8ae65 REFERENCE 416baaa9-dc9f-4396-8d5f-8c081fb06d67
- https://git.kernel.org/stable/c/f1de829ee87a1198d3465493ce430d36c5fa029c REFERENCE 416baaa9-dc9f-4396-8d5f-8c081fb06d67
Information gaps & confidence notes
These gaps indicate missing source data. CVE Watch does not fill them with guessed product, exploit or patch details.
- NVD does not currently provide machine-readable vulnerable CPE product/version entries for this record.
- No vendor advisory or patch reference was identified in the supplied CVE references.
- No CWE classification is currently available.
Last enrichment: 2026-11-04T19:32:09+00:00 · Source last modified: 2026-11-03T18:15:39.353