CVE-2026-19595
The user-mode syscall verifier z_vrfy_rtio_cqe_get_mempool_buffer() in subsys/rtio/rtio_syscalls.c validated its two output parameters, buff and buff_len, with K_SYSCALL_MEMORY_READ() rather than K_SYSCALL_MEMORY_WRITE(). Both are pure out-parameters: z_impl_rtio_cqe_get_mempool_buffer() stores the mempool buffer address and its length through them. The distinction is enforced by every architecture validator — arch_buffer_validate() on RISC-V PMP explicitly accepts the global __rom_region/__rodata_region for reads only, and the ARM MPU validators accept P_RO_U_RO and P_RW_U_RO regions for reads only — so a read-validated pointer is not necessarily writable by the calling thread. An unprivileged user-mode thread that has been granted access to an RTIO context (rtio_access_grant()) can invoke the rtio_cqe_get_mempool_buffer() syscall with buff/buff_len pointing at memory it may read but not write, and with a completion-queue entry whose flags field it fully controls (only RTIO_CQE_FLAG_MEMPOOL_BUFFER in flags[7:0] is required; flags[19:8] and flags[31:20] supply the block index and count). The kernel then performs a pointer-sized and a 4-byte store through those addresses while running in supervisor mode. Reaching the store requires CONFIG_USERSPACE together with CONFIG_RTIO_SYS_MEM_BLOCKS, the configuration behind RTIO_DEFINE_WITH_MEMPOOL; without the latter the implementation returns -ENOTSUP and writes nothing. Two outcomes follow. If the target lies in a memory-domain partition declared K_MEM_PARTITION_P_RW_U_RO (privileged read-write, user read-only), the kernel-mode store succeeds and deposits partly attacker-chosen values into memory the memory domain had marked read-only for that thread, bypassing the partition's write protection. If the target lies in globally readable but unwritable memory such as .text/.rodata in flash, the store faults in kernel mode; the fault is delivered to z_fatal_error() and the default k_sys_fatal_error_handler() halts or reboots the device, giving an unprivileged thread a reliable full denial of service. The read-permission check does bound the damage: the address must still be readable by the calling thread, so kernel-private memory cannot be targeted and no confidential data is disclosed. The fix replaces both checks with K_SYSCALL_MEMORY_WRITE(), so a thread lacking write permission is terminated by K_OOPS before the implementation runs; the cqe argument correctly remains read-validated.
Executive briefing
The source record describes: The user-mode syscall verifier z_vrfy_rtio_cqe_get_mempool_buffer() in subsys/rtio/rtio_syscalls.c validated its two output parameters, buff and buff_len, with K_SYSCALL_MEMORY_READ() rather than K_SYSCALL_MEMORY_WRITE(). Both are pure out-parameters: z_impl_rtio_cqe_get_mempool_buffer() stores the mempool buffer address and its length through them. The distinction is enforced by every architecture validator — arch_buffer_validate() on RISC-V PMP explicitly accepts the global __rom_region/__rodata_region for reads only, and the ARM MPU validators accept P_RO_U_RO and P_RW_U_RO regions for reads only — so a read-validated pointer is not necessarily writable by the calling thread. An unprivileged user-mode thread that has been granted access to an RTIO context (rtio_access_grant()) can invoke the rtio_cqe_get_mempool_buffer() syscall with buff/buff_len pointing at memory it may read but not write, and with a completion-queue entry whose flags field it fully controls (only RTIO_CQE_FLAG_MEMPOOL_BUFFER in flags[7:0] is required; flags[19:8] and flags[31:20] supply the block index and count). The kernel then performs a pointer-sized and a 4-byte store through those addresses while running in supervisor mode. Reaching the store requires CONFIG_USERSPACE together with CONFIG_RTIO_SYS_MEM_BLOCKS, the configuration behind RTIO_DEFINE_WITH_MEMPOOL; without the latter the implementation returns -ENOTSUP and writes nothing. Two outcomes follow. If the target lies in a memory-domain partition declared K_MEM_PARTITION_P_RW_U_RO (privileged read-write, user read-only), the kernel-mode store succeeds and deposits partly attacker-chosen values into memory the memory domain had marked read-only for that thread, bypassing the partition's write protection. If the target lies in globally readable but unwritable memory such as .text/.rodata in flash, the store faults in kernel mode; the fault is delivered to z_fatal_error() and the default k_sys_fatal_error_handler() halts or reboots the device, giving an unprivileged thread a reliable full denial of service. The read-permission check does bound the damage: the address must still be readable by the calling thread, so kernel-private memory cannot be targeted and no confidential data is disclosed. The fix replaces both checks with K_SYSCALL_MEMORY_WRITE(), so a thread lacking write permission is terminated by K_OOPS before the implementation runs; the cqe argument correctly remains read-validated. The practical risk depends on whether an affected product/version is present, reachable and configured in an exploitable way. Review the affected-product evidence and linked vendor advisories before assigning exposure status.
Evidence confidence: Limited Evidence-derived, not an exploitability verdict
Severity & attack characteristics
CVSS vector:CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:H
Technical explanation & impact
The technical mechanism is not expanded beyond the source description unless a referenced advisory supplies additional evidence. Read the linked vendor/CERT advisories for root-cause detail.
Potential impact must be interpreted from the published CVSS impact metrics and the affected component. A CVSS impact score is not proof that a particular asset is exploitable.
Weakness classification
CWE-787CWE-822Affected products and versions
NVD has not supplied machine-readable vulnerable CPE product/version entries for this CVE. This is an information gap, not proof that no products are affected. Check the vendor advisory references below.
Remediation & validation
- Identify exposure by comparing the affected product and version ranges with your asset inventory, SBOM and externally exposed services.
- Review the linked vendor security advisory or patch notes. Upgrade to a vendor-confirmed fixed release; do not infer a fixed version from the CVE description.
- Until patched, consider restricting network access or disabling the affected feature where operationally safe. These are temporary controls, not a substitute for a vendor fix.
- Validate the remediation with a version check and vulnerability rescan, then retain change evidence.
No fixed version is displayed unless it is explicitly established by a vendor advisory. Follow the vendor's release notes for exact product and branch applicability.
Vendor advisories, patches & exploit references
- https://github.com/zephyrproject-rtos/zephyr/commit/bea93400138362691403b7f81de1e9048681547d VENDOR vulnerabilities@zephyrproject.org
- https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-7337-mc44-5wjm VENDOR vulnerabilities@zephyrproject.org
Information gaps & confidence notes
These gaps indicate missing source data. CVE Watch does not fill them with guessed product, exploit or patch details.
- NVD does not currently provide machine-readable vulnerable CPE product/version entries for this record.
Last enrichment: 2026-11-05T05:59:04+00:00 · Source last modified: 2026-11-04T05:18:49.410