Evidence-led vulnerability intelligence · 2026-10-22 00:47 IST

CVE-2026-18748

The Bluetooth Classic A2DP host stores a codec Information Element (IE) in struct bt_a2dp_codec_ie, a one-byte len field plus a fixed 8-byte codec_ie[] array. When an AVDTP peer sent a codec IE longer than 8 bytes, a2dp_process_config_ind() in subsys/bluetooth/host/classic/a2dp.c copied only the first 8 bytes but assigned the full, attacker-chosen length to len, and then persisted that inconsistent structure into the application's struct bt_a2dp_stream via stream->codec_config. bt_a2dp_get_config_cb() and bt_a2dp_set_config_cb() had the same truncate-the-copy-but-keep-the-length pattern. Every later consumer trusts len. In particular the responder for an incoming AVDTP GET_CONFIGURATION, a2dp_get_config_ind(), executes net_buf_add_mem(rsp_buf, &ep->stream->codec_config.codec_ie[0], ep->stream->codec_config.len), so a paired BR/EDR peer that first sends a SET_CONFIGURATION carrying an oversized codec IE and then requests the configuration back causes the stack to read up to roughly 245 bytes past the end of the 8-byte array and transmit them in the response. codec_config is the last member of struct bt_a2dp_stream, so the read runs into memory adjacent to the application's stream object. The same inconsistency is also handed to the config_req(), reconfig_req() and get_config_rsp() application callbacks, where a natural memcpy() of len bytes performs a further out-of-bounds read. Reaching the on-air disclosure requires CONFIG_BT_CLASSIC with CONFIG_BT_A2DP, an AVDTP peer that has completed pairing (the AVDTP L2CAP channel requires BT_SECURITY_L2), and a local endpoint registered for a non-SBC codec — BT_A2DP_MPEG1/BT_A2DP_MPEG2/BT_A2DP_ATRAC/BT_A2DP_VENDOR via BT_A2DP_EP_INIT() — because the SBC branch already pins the IE length to 4 bytes. The bt_a2dp_get_config_cb() response path has no such gate and hands the lying length to any application. There is no out-of-bounds write: the net_buf tailroom check bounds the destination, so the impact is limited to disclosure of a bounded region of adjacent RAM to the peer. The fix replaces the hardcoded BT_A2DP_MAX_IE_LENGTH with the configurable CONFIG_BT_A2DP_CODEC_MAX_IE_LEN (default 8, range 4–253), sizes codec_ie[] from it, and rejects any received IE that exceeds it instead of silently truncating, so len can no longer exceed the number of valid bytes.

LOW · 3.5

Executive briefing

The source record describes: The Bluetooth Classic A2DP host stores a codec Information Element (IE) in struct bt_a2dp_codec_ie, a one-byte len field plus a fixed 8-byte codec_ie[] array. When an AVDTP peer sent a codec IE longer than 8 bytes, a2dp_process_config_ind() in subsys/bluetooth/host/classic/a2dp.c copied only the first 8 bytes but assigned the full, attacker-chosen length to len, and then persisted that inconsistent structure into the application's struct bt_a2dp_stream via stream->codec_config. bt_a2dp_get_config_cb() and bt_a2dp_set_config_cb() had the same truncate-the-copy-but-keep-the-length pattern. Every later consumer trusts len. In particular the responder for an incoming AVDTP GET_CONFIGURATION, a2dp_get_config_ind(), executes net_buf_add_mem(rsp_buf, &ep->stream->codec_config.codec_ie[0], ep->stream->codec_config.len), so a paired BR/EDR peer that first sends a SET_CONFIGURATION carrying an oversized codec IE and then requests the configuration back causes the stack to read up to roughly 245 bytes past the end of the 8-byte array and transmit them in the response. codec_config is the last member of struct bt_a2dp_stream, so the read runs into memory adjacent to the application's stream object. The same inconsistency is also handed to the config_req(), reconfig_req() and get_config_rsp() application callbacks, where a natural memcpy() of len bytes performs a further out-of-bounds read. Reaching the on-air disclosure requires CONFIG_BT_CLASSIC with CONFIG_BT_A2DP, an AVDTP peer that has completed pairing (the AVDTP L2CAP channel requires BT_SECURITY_L2), and a local endpoint registered for a non-SBC codec — BT_A2DP_MPEG1/BT_A2DP_MPEG2/BT_A2DP_ATRAC/BT_A2DP_VENDOR via BT_A2DP_EP_INIT() — because the SBC branch already pins the IE length to 4 bytes. The bt_a2dp_get_config_cb() response path has no such gate and hands the lying length to any application. There is no out-of-bounds write: the net_buf tailroom check bounds the destination, so the impact is limited to disclosure of a bounded region of adjacent RAM to the peer. The fix replaces the hardcoded BT_A2DP_MAX_IE_LENGTH with the configurable CONFIG_BT_A2DP_CODEC_MAX_IE_LEN (default 8, range 4–253), sizes codec_ie[] from it, and rejects any received IE that exceeds it instead of silently truncating, so len can no longer exceed the number of valid bytes. The practical risk depends on whether an affected product/version is present, reachable and configured in an exploitable way. Review the affected-product evidence and linked vendor advisories before assigning exposure status.

Assessment: Potential exposure only — validate the installed product, exact version, configuration and vendor applicability before treating an asset as confirmed vulnerable.

Evidence confidence: Limited Evidence-derived, not an exploitability verdict

Severity & attack characteristics

3.5 / 10 · 3.1

CVSS vector:
CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N

Attack vectorA
Attack complexityL
Privileges requiredL
User interactionN
ScopeU
Confidentiality impactL
Integrity impactN
Availability impactN

Technical explanation & impact

The technical mechanism is not expanded beyond the source description unless a referenced advisory supplies additional evidence. Read the linked vendor/CERT advisories for root-cause detail.

Potential impact must be interpreted from the published CVSS impact metrics and the affected component. A CVSS impact score is not proof that a particular asset is exploitable.

Weakness classification

CWE-125

Affected products and versions

NVD has not supplied machine-readable vulnerable CPE product/version entries for this CVE. This is an information gap, not proof that no products are affected. Check the vendor advisory references below.

Remediation & validation

  1. Identify exposure by comparing the affected product and version ranges with your asset inventory, SBOM and externally exposed services.
  2. Review the linked vendor security advisory or patch notes. Upgrade to a vendor-confirmed fixed release; do not infer a fixed version from the CVE description.
  3. Until patched, consider restricting network access or disabling the affected feature where operationally safe. These are temporary controls, not a substitute for a vendor fix.
  4. Validate the remediation with a version check and vulnerability rescan, then retain change evidence.

No fixed version is displayed unless it is explicitly established by a vendor advisory. Follow the vendor's release notes for exact product and branch applicability.

Vendor advisories, patches & exploit references

Information gaps & confidence notes

These gaps indicate missing source data. CVE Watch does not fill them with guessed product, exploit or patch details.

Last enrichment: 2026-11-05T06:00:12+00:00 · Source last modified: 2026-11-04T05:18:47.233

Open NVD record ← Back to CVE Watch

Threat intelligence, made actionable · CVE data sourced from the NVD