CVE-2026-15893
net_if_ipv6_calc_reachable_time() in subsys/net/ip/net_if.c derives a randomized ND reachable time from ipv6->base_reachable_time as min_reachable + sys_rand32_get() % (max_reachable - min_reachable), where min_reachable = base/2 and max_reachable = 3*base/2 using integer division. When base_reachable_time is 1, both min_reachable and the modulus collapse so the function returns 0, and net_if_ipv6_set_reachable_time() stores that 0 into ipv6->reachable_time. The base_reachable_time is attacker-controlled: handle_ra_input() in subsys/net/ip/ipv6_nbr.c accepts the Reachable Time field of an incoming Router Advertisement whenever it is nonzero and <= MAX_REACHABLE_TIME, so a single unauthenticated, link-local RA carrying a Reachable Time of 1 drives the computed reachable time to 0. Router Advertisements are unauthenticated by default and require only adjacency to the target link. When a neighbor is subsequently confirmed reachable, net_ipv6_nbr_set_reachable_timer() reads the value and executes NET_ASSERT(time, "Zero reachable timeout!"). On builds with CONFIG_ASSERT enabled this triggers a fatal kernel assertion — a remote denial of service; on builds without assertions the reachable timer is armed with K_MSEC(0) and fires immediately, forcing reachable neighbors into perpetual re-solicitation (STALE), degrading Neighbor Discovery. The impact is limited to availability; there is no memory-safety, confidentiality, or integrity consequence.
Executive briefing
The source record describes: net_if_ipv6_calc_reachable_time() in subsys/net/ip/net_if.c derives a randomized ND reachable time from ipv6->base_reachable_time as min_reachable + sys_rand32_get() % (max_reachable - min_reachable), where min_reachable = base/2 and max_reachable = 3*base/2 using integer division. When base_reachable_time is 1, both min_reachable and the modulus collapse so the function returns 0, and net_if_ipv6_set_reachable_time() stores that 0 into ipv6->reachable_time. The base_reachable_time is attacker-controlled: handle_ra_input() in subsys/net/ip/ipv6_nbr.c accepts the Reachable Time field of an incoming Router Advertisement whenever it is nonzero and <= MAX_REACHABLE_TIME, so a single unauthenticated, link-local RA carrying a Reachable Time of 1 drives the computed reachable time to 0. Router Advertisements are unauthenticated by default and require only adjacency to the target link. When a neighbor is subsequently confirmed reachable, net_ipv6_nbr_set_reachable_timer() reads the value and executes NET_ASSERT(time, "Zero reachable timeout!"). On builds with CONFIG_ASSERT enabled this triggers a fatal kernel assertion — a remote denial of service; on builds without assertions the reachable timer is armed with K_MSEC(0) and fires immediately, forcing reachable neighbors into perpetual re-solicitation (STALE), degrading Neighbor Discovery. The impact is limited to availability; there is no memory-safety, confidentiality, or integrity consequence. The practical risk depends on whether an affected product/version is present, reachable and configured in an exploitable way. Review the affected-product evidence and linked vendor advisories before assigning exposure status.
Evidence confidence: Limited Evidence-derived, not an exploitability verdict
Severity & attack characteristics
CVSS vector:CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Technical explanation & impact
The technical mechanism is not expanded beyond the source description unless a referenced advisory supplies additional evidence. Read the linked vendor/CERT advisories for root-cause detail.
Potential impact must be interpreted from the published CVSS impact metrics and the affected component. A CVSS impact score is not proof that a particular asset is exploitable.
Weakness classification
CWE-617Affected products and versions
NVD has not supplied machine-readable vulnerable CPE product/version entries for this CVE. This is an information gap, not proof that no products are affected. Check the vendor advisory references below.
Remediation & validation
- Identify exposure by comparing the affected product and version ranges with your asset inventory, SBOM and externally exposed services.
- Review the linked vendor security advisory or patch notes. Upgrade to a vendor-confirmed fixed release; do not infer a fixed version from the CVE description.
- Until patched, consider restricting network access or disabling the affected feature where operationally safe. These are temporary controls, not a substitute for a vendor fix.
- Validate the remediation with a version check and vulnerability rescan, then retain change evidence.
No fixed version is displayed unless it is explicitly established by a vendor advisory. Follow the vendor's release notes for exact product and branch applicability.
Vendor advisories, patches & exploit references
- https://github.com/zephyrproject-rtos/zephyr/commit/251079ed50464aa0976eb0738a5afbe009cc9d60 VENDOR vulnerabilities@zephyrproject.org
- https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-8v32-9xf8-r765 VENDOR vulnerabilities@zephyrproject.org
Information gaps & confidence notes
These gaps indicate missing source data. CVE Watch does not fill them with guessed product, exploit or patch details.
- NVD does not currently provide machine-readable vulnerable CPE product/version entries for this record.
Last enrichment: 2026-11-05T05:53:08+00:00 · Source last modified: 2026-11-04T05:18:43.963